Sticky Back Blanket

Rubber Compound
-
Business, Normal & UV Inks
Finish - Ground & Buffed
Colour - Blue
Physical Properties - 0.95mm 1.05mm
Compressible Layer - Closed Cell
Ply - 2
Thickness - 0.93 - 0.97mm
Tensile Strength at Break - 46kN/m
Elongation at Break - 13.40%
Elongation at 500N/50mm - 4.46%
Roughness (RA) - 2.30µm
Hardness (Shore A) - 87
Compressibility at 0.2mm - 2.04MPa
Paper Feeding Ratio - N/A
Available in 0.95mm and 1.05mm
Adhesive backed blanket for use in continuous stationery printing for conventional and UV inks.
Excellent ink transfer
Excellent smash resistance
Minimal dot gain
Leaves no residue and does not tear when removed
Kinyo Airtack M Blanket
INNOVATION Kinyo a major global manufacturer leads the industry with innovative blanket development.
Our commitment is to continue developing and delivering innovative products that improve
quality and extend blanket life on press.
RELIABILITY The consistency and quality of our compressible layer technology and improved gauge
control from our advanced bung techniques gives a superior result, faster recovery
on press, improved smash resistance and reduced gauge loss.
VALUE Improvements provided by a compressible layer means exceptional long life from the
blanket, improving production time and reducing down-time on press.
Air Tack M & J UV
Two blankets that have been designed for continuous stationery
applications and envelope printing.
Air Tack M for use with conventional and UV curing inks
Air Tack J UV for use with UV curing inks
SURFACE M J
Rubber compound Conventional and UV inks UV inks only
Surface nish Bued Bued
Roughness (Ra) 2.0 μm 1.6 μm
Colour Blue Purple
CONSTRUCTION
Compressible layer design Closed cell Closed cell
Nominal thickness 0.90mm/0.95 mm /1.00mm 0.95 mm/1.05mm
1.05mm/1.07mm
PHYSICAL PROPERTY
Thickness range +/ - 0.02 mm +/ - 0.02 mm
Overall hardness (Shore A) 87° 86°
Micro hardness (Shore A) 55° 61°
Tensile strength at break > 40 N/mm > 40 N/mm
Elongation at 10 N/mm < 6.0% < 6.0%
Kinyo reserve the right to change blanket specications as required
SURFACE M J
Rubber compound Conventional and UV inks UV inks only
Surface nish Bued Bued
Roughness (Ra) 2.0 μm 1.6 μm
Colour Blue Purple
CONSTRUCTION
Compressible layer design Closed cell Closed cell
Nominal thickness 0.90mm/0.95 mm /1.00mm 0.95 mm/1.05mm
1.05mm/1.07mm
PHYSICAL PROPERTY
Thickness range +/ - 0.02 mm +/ - 0.02 mm
Overall hardness (Shore A) 87° 86°
Micro hardness (Shore A) 55° 61°
Tensile strength at break > 40 N/mm > 40 N/mm
INNOVATION Kinyo a major global manufacturer leads the industry with innovative blanket development.
Our commitment is to continue developing and delivering innovative products that improve
INNOVATION Kinyo a major global manufacturer leads the industry with innovative blanket development.
Our commitment is to continue developing and delivering innovative products that improve
INNOVATION Kinyo a major global manufacturer leads the industry with innovative blanket development.
Our commitment is to continue developing and delivering innovative products that improve